Baltic 4 sur socle
Baltic 4 on base
Baltic 4 mit Sockel
1
ORIENTATION MURALE
DE BALTIC 4
Baltic 4
on wall positioning
Ausrichtung des Baltic 4
mit Wandbefestigung
2
2
2
2
MONTAGE MURAL
DE BALTIC 4
Déballer la Baltic 4 murale.
Démonter la bague
C
en utilisant les 2 barres métalliques
fournies avec la Baltic 4 murale.
Enlever la vis
b
et retirer l’enjoliveur
B
Installer la plaque
A
sur le mur avec 4 vis de fixation adap-
tées au type de mur ou de support.
Bien positionner l’ouverture prévue pour le passage du
câble haut-parleur (Cable Output) en fonction du type de
montage souhaité :
- vers le haut pour ne pas être visible si le câble est posé en
applique sur le mur
- face aux bornes haut-parleurs si le câble sort du mur der-
rière la plaque
A
.
Faire passer le câble à travers la pièce
A
si le câble sort du mur.
Remonter l’enjoliveur
B
sur la plaque
A
et le fixer avec la vis
b
Visser à la main la bague
C
sur la plaque
A
, orienter la Baltic
4 murale et figer la position en serrant fortement avec les 2
barres métalliques fournies.
INSTRUCTIONS FOR ON WALL
MOUNTING OF BALTIC 4
MURALE
Unpack the Baltic 4 on wall.
Unscrew the
C
ring with the help of the 2 metal sticks in-
cluded in package.
Take out the screw on
b
and pull out the
B
painted carter.
Wall mount the
A
metal piece by using 4 screws or bolts
adapted to the characteristics of the wall.
Do not forget to position the cable (Cable Ouput) in the
optimal way :
- up if your speaker cable is not coming out of the wall
- facing the terminals if the speaker cable comes out of the
wall behind piece
A
.
Have the speaker cable go through piece
A
if the cable
comes out of the wall.
Mount part
B
back on
A
with the
b
screw.
Mount
C
on
A
and tighten it firmly with the 2 sticks in-
cluded.
MONTAGEANLEITUNG FÜR BALTIC
4 MIT WANDBEFESTIGUNG
Den Baltic 4 mit Wandbefestigung aus der Verpackung neh-
men.
Mithilfe der mit einem Baltic 4 gelieferten Metallstifte den
Ring
C
abmontieren.
Schraube
b
abschrauben und Kappe
B
abnehmen.
Platte
A
mit 4 der Wand oder der Halterung angepassten
Schrauben installieren.
Den Durchgang für das Lautsprecherkabel Ouput (Cable
Ouput) je nach gewünschter Befestigung positionieren :
- nach oben wenn das Kabel entlang der Mauer ange bracht ist
- gegenüber den Kabelschuhen bei Kabelausstritt aus der Wand.
Das Kabel durch das Teil
A
bei bei Kabelausstritt aus der Wand.
Kappe
B
wieder auf Platte
A
anbringen und mit Schraube
b
befestigen.
Den Ring
C
von Hand auf der Platte
A
festschrauben, Bal-
tic 4 in die gewünschte Position bringen und mithilfe der 2
mitgelieferten Stifte festschrauben.