cab - Produkttechnik GmbH
32
Loading Labels
1. Place the label roll (1) onto the prepared media hub (3) and slide it against
the wind plate (5). The solid line represents the feed path of outside-rolled
labels, the broken line of inside-rolled labels.
2. Put the flange (4) on the supply hub (3), slide it against the label roll (1) and
fix it at the supply hub by tightening the knurled knob (2).
3. Swing the three levers (9, 19 und 16) clockwise until they stop and open
this way the transport system (10,11) and the backfeed system (17,18).
The printhead (15) also will be unlocked from the print roller.
4. Loosen the knurled knob (12) and slide the media guide (13) into its
outermost position.
Fig. 6b Media loading Hermes 4N/5N
10
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
Summary of Contents for Hermes 4F
Page 27: ...27 cab Produkttechnik GmbH ...
Page 50: ...50 cab Produkttechnik GmbH ...
