background image

16

16

Configuration

4.1.4 

Interfaces

 

Start Offline menu.

 

Select 

Setup > Interfaces

.

Parameter

Meaning

Default

Network

Configuration parameters of the network interfaces   

Additional configuration parameters for the network interfaces can be accessed via 

the web interface 

 ”Setup Tab” on page 20.

> Ethernet

Configuration of the Ethernet interface 

>> DHCP

Method of issuing IP address

On

: Dynamic issuing of IP address by the DHCP server

Off

: Direct issuing of the IP address by the operator

On

>> IP

IP address of the label printer. Only valid with 

DHCP = Off.

-

>> Mask

Subnet mask (classification and address range) of the local network. 

Only valid with

 DHCP = Off.

-

>> Gateway

Connection address between the local network and other networks. 

The IP address of the connecting computer (router) on the network is 

used for this. The address of the router can also be issued via DHCP.

Off

> WLAN

Configuration of the optional WLAN interface 

* Configuration only with WLAN interface connected

>> Access-Point

Selection of the Access Point to setting up the WLAN connection.

-

>> DHCP

 

Ethernet > DHCP

On

>> IP

 

Ethernet > IP

-

>> Mask

 

Ethernet > Mask

-

>> Gateway

 

Ethernet > Gateway

On

> Network error

Printer switches to Error mode when problems with the network 

connection occur.

Off

RS-232

Configuration of the optional RS-232 interface

   If interface is not installed, access only with service key inserted 

> Baud rate

Speed (in Baud) of data transfer

57.600

> Handshake

Data transfer protocol

RTS/CTS

Default storage

Definition of the default storage, which can be operated by the 

control panel 

USB Memory

 : USB flash drive at USB master interface 

IFFS :

 Internal Flash File System.

USB 

Memory

Character set

Selection of the character set table for adaptation to the computer 

system used. Switching the character set via software is not 

possible. Characters not available in the selected character set can 

be accessed using the Unicode table.

UTF-8

Interpreter

Menu for choosing between the programming languages JScript and  

ZPL individually for the respective interfaces

JScript

Table 6 

Parameters of the menu 

Setup > Interfaces

Summary of Contents for EOS4

















































Reviews: