
cab Produkttechnik GmbH
51
Base Housing
13. Release the screw on the left bracket of the chassis.
14. Unlatch the print head module. Hook the white roller on the brackets of the chassis,
ensuring the long thinner end at the left side.
15. Guide the shaft go through the respective holes on the left bracket, the white roller, and
the right bracket in order. (To smooth this procedure, better hold the white roller with one
hand.)
16. Secure the attached screw at right bracket of the chassis to fix the shaft.
17. Hook the dispenser bar on the brackets of the chassis, positioning it above the white
roller. Ensure that the dispenser bar is paralleled with the black platen roller and it’s long
thinner end is at the left.
18. Secure back the screw on the left bracket of the chassis.
19. Guide the sensor cable connector through the hole on the upper left corner of middle
cover.