
cab Produkttechnik GmbH
19
Cutter Mode
(Installing the cutter, please refer to Appendix II )
Follow the same procedure as „Loading the Media“ from step 1 to step 8.
9. Thread the media over the platen roller, then route the media through the slot of the
cutter module.
10. Press down the print head module firmly.
11. Close the top cover and turn on the printer or press the „FEED“ button if the printer is
already on.
Note : The „FEED“ button will not drive the printer to cut. The cutting work can be executed
only when the software setting is ready.