
18
cab Produkttechnik GmbH
15. Close the top cover and turn on the printer or press the „FEED“ button if the printer is
already on.
Note : The „FEED“ button will not drive the printer to peel. The peeling work can be
executed only when the softwaresetting is ready.
12. Press „FEED“ button and the label backing paper will come out from the slot under the
H cover.
13. On e2 Peel-Off mode, powered on status, in case of improper installation, just keep
pressing the „FEED“button to back-feed thelabel stock to re-install it.
14. To remove any slack, just rewind the media onto the roll. Press down the print head
module firmly.