13
5.2 Operation Without Cover Plates
Due to the most varied materials it can come in rare cases to transportation
problems of the material depend of the cover plates.
It's possible to clear this problem with dismounting the cover plates.
!
Warning!
Risk of injury!
If the cover plates for a better performance should be removed,
appropriate compensating measures are to be arranged for the
guarantee of security!
i
Notice!
In case the material do adhere in follow of electrostatic charge it's
possible to use a discharge brush for the printer by
cab
.
2
2
1
3 4
4
!
Warning!
Risk of injury! The cutter blades are sharp!
Disconnect printer from electrical outlet .
1. Switch off the printer and demount the cutter.
2. Loosen screws (4) and detach cover plate (3).
3. Loosen screws (2) and detach cover plate (1).
Mounting in converse order.