6
6
2
Product Description
2.1
Important Features
•
The supporting air and the vacuum as well as the speed of the cylinder are adjustable. That way the applicator
can be adapted to different label materials and sizes.
•
To avoid contamination within the vacuum channels they are cleaned by air pressure pulses at the end of each
application.
•
For operation within a system the I/O interface of the printer can be used.
2.2
Technical Data
Stroke Applicator
4126C-300
4126C-400
4136C-300
4136C-400
Cylinder stroke
mm
300
400
300
400
Product height
variable
variable
variable
variable
Horizontal cylinder
mm
25
25
25
25
Labeling onto the product
from the top,
from below,
from the side
from the top,
from below,
from the side
from the top,
from below,
from the side
from the top,
from below,
from the side
Compressed air pressure
bar
4,5
4,5
4,5
4,5
Blow tube
number
1
1
2
2
Cycle time about frequency aprox. labels/min.
1)
20
20
20
20
Tamp pad
4126C-11 F 4126C-12 F 4126C-19 F
-
Label width
mm
46-174
-
Label height
mm
20-100
-
Product distance to lower edge
up to mm
220
320
-
Immersion depth pad F
2)
mm
90
-
Product during labeling
fixed
-
Tamp pad spring-loaded
4126C-3900
4136C-3900
Label width
mm
80-174
80-174
Label height
mm
80-150
151-350
Product distance to lower edge
up to mm
215
315
215
315
Product during labeling
fixed
fixed
Roll on pad
4126C-4900
4136C-4900
Label width
mm
50-174
50-174
Label height
mm
80-150
151-350
Product distance to lower edge
mm
245-275
345-375
275-360
375-460
Product during labeling
in motion
in motion
1)
Determined at 100 mm label height / print speed 100 mm/s.
2)
Immersion depth at applicator >25 mm, the cover of the Hermes C must be modified.
Table 1
Technical Data