background image

13

Licences

5.1 

Declaration of Incorporation

cab Produkttechnik  
GmbH & Co KG 
Wilhelm-Schickard-Str. 14 
D-76131 Karlsruhe 
Germany

Declaration of Incorporation

We declare herewith that the following „partly completed machinery“ as a result of design, construction and the version 
put in circulation complies with the essential requirements of the 

Directive 2006/42/EC on machinery

:

Annex I, Article 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.3.2, 1.5.2, 1.5.8, 1.6.3, 1.7

In the event of any alteration which has not been approved by us being made to any device as designated below, this 
statement shall thereby be made invalid.

Device:

Stroke Applicator

Type:

4126C, 4136C

Applied EU Regulations:

Applied Standards:

Directive 2006/42/EC on machinery:

• 

EN ISO 12100:2010

• 

EN ISO 13849-1:2008

• 

EN 60950-1:2006 
+A11:2009+A12:2011+A1:2010+A2:2013

Other Relevant Directives:

• 

Directive 2014/30/EU relating to electromagnetic compatibility

• 

Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and 
electronic equipment

Person authorised to compile the technical file:

Erwin Fascher 
Am Unterwege 18/20 
99610 Sömmerda

Signed for, and on behalf of the Manufacturer:

cab Produkttechnik Sömmerda 
Gesellschaft für Computer- 
und Automationsbausteine mbH 
99610 Sömmerda

Sömmerda, 08.07.2019

Erwin Fascher 
Managing Director

The product must not be put into service until the final machinery into which it is to be incorporated has been declared in 

conformity with the provisions of the Directive on machinery.

The documents according annex VII part B from the incomplete machinery are created and will commit to state agencies 
on request in electronic kinds.

Summary of Contents for 4126C















Reviews: