INSTRUCTIONS FOR REPLACING THE LINE
OF YOUR PERFECT DESCENT
The enclosed kit contains all components (excluding tools) required to replace
the webbing line and integral nozzle and carabiner of your Perfect Descent
Climbing System. A line that appears damaged, abraded, worn or faded
should be replaced immediately. Replace the line as part of the regular main-
tenance schedule. Frequency of replacement will vary depending upon use,
and the amount of abrasion the line experiences from the climbing wall. At a
minimum, the line should be replaced twice annually, or after 5,000 climb/lower
cycles, whichever comes first. The enclosed kit may also be used to replace
the carabiner if, upon inspection, it does not function properly, is damaged, or
will not automatically close and lock.
CAUTION
When replacing your Perfect Descent line, you should take specified
precautions to prevent the line from twisting inside the housing. You
should also ensure that when the line is detached at the joint, the free
end will not escape inside the housing under the force of the retracing
spring. Please read and understand all instructions provided
BEFORE
you begin line replacement. Failure to follow specified precautions may
result in damage to the Perfect Descent and require factory service.
