C2R Colibri 5 Series, User Manual

Page: 73 / 168

Colibri serie 5 : User’s guide
© 2000-2008 C2R Technologie, Sarl. All rights reserved
73
Rev. C
UPC-E0 Addenda Separator
When this feature is on, there is a space between the data from the bar code and the data from
the addenda. When turned off, there is no space. Default = On.
UPC-E0 Check Digit
Check Digit specifies whether the check digit should be transmitted at the end of the scanned
data or not. Default = On.
UPC-E0 Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the beginning of the
scanned data, but the unit can be programmed so it will not transmit it. Default = On.
UPC-E0 Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-E data. Default = Off for both 2
Digit and 5 Digit Addenda.