C2R Colibri 5 Series, User Manual

Page: 54 / 168

Colibri serie 5 : User’s guide
© 2000-2008 C2R Technologie, Sarl. All rights reserved.
54 54
Rev. C
be moved ahead.)

F6 Move the cursor back “nn” characters from current cursor position. Syntax = F6nn (nn
stands for the numeric value (00-99) for the number of characters the cursor should be
moved back.)

F7 Move the cursor to the beginning of the data string. Syntax = F7 .

Move the cursor to the end of the data string. Syntax = EA
Search Commands

F8 Search ahead for “xx” character from current cursor position, leaving cursor pointing to
“xx” character. Syntax = F8xx (xx stands for the hex value for an ASCII code, see ASCII
Conversion Chart (Code Page 1252), page 157.

F9 Search back for “xx” character from current cursor position, leaving cursor pointing to
“xx” character. Syntax = F9xx (xx stands for the hex value for an ASCII code, see ASCII
Conversion Chart (Code Page 1252), page 157.

E6 Search ahead for the first non “xx” character from the current cursor position, leaving
cursor pointing to non “xx” character. Syntax = E6xx (xx stands for the hex value for an
ASCII code, see ASCII Conversion Chart (Code Page 1252), page 157.

E7 Search back for the first non “xx” character from the current cursor position, leaving
cursor pointing to non “xx” character. Syntax = E7xx (xx stands for the hex value for an
ASCII code, see ASCII Conversion Chart (Code Page1252), page 157.)
Miscellaneous Commands

FB Suppress all occurrences of up to 15 different characters, starting at the current cursor
position, as the cursor is advanced by other commands. When the FC command is
encountered, the suppress function is terminated. The cursor is not moved by the FB
command.
Syntax = FBnnxxyy . .zz where nn is a count of the number of suppressed
characters in the list and xxyy .. zz is the list of characters to be suppressed. (xx stands
for the hex value for an ASCII code, see ASCII Conversion Chart (Code Page 1252),
page 157.

FC Disables suppress filter and clear all suppressed characters. Syntax = FC .

E4 Replaces up to 15 characters in the data string with user specified characters.
Replacement continues until the E5 command is encountered. Syntax =
E4nnxx
1
xx
2
yy
1
yy
2
...zz
1
zz
2
where nn is the total count of both characters to be
replaced plus replacement characters; xx
1
defines characters to be replaced and xx
2
defines replacement characters, continuing through zz
1
and zz
2
.

E5 Terminates character replacement. Syntax = E5 .

FE Compare character in current cursor position to the character “xx.” If characters are
equal, increment cursor. If characters are not equal, no format match. Syntax = FExx (xx
stands for the hex value for an ASCII code, see ASCII Conversion Chart (Code Page
1252), page 157.