C2R Colibri 5 Series, User Manual

Page: 23 / 168

Colibri serie 5 : User’s guide
© 2000-2008 C2R Technologie, Sarl. All rights reserved
23
Rev. C
Keyboard Style
This programs keyboard styles, such as Caps Lock and Shift Lock. Default = Regular.
Regular is used when you normally have the Caps Lock key off.
* Regular
Caps Lock is used when you normally have the Caps Lock key on.
Shift Lock
is used when you normally have the Shift Lock key on (not common to U.S.
keyboards).
Automatic Caps Lock is used if you change the Caps Lock key on and off. The software tracks
and reflects if you have Caps Lock on or off (AT and PS/2 only). This selection can only be used
with systems that have an LED which notes the Caps Lock status.
Auto caps via NumLock barcode should be scanned in countries (e.g., Germany, France) where
the Caps Lock key cannot be used to toggle Caps Lock. The NumLock option works similarly to
the regular Autocrats, but uses the NumLock key to retrieve the current state of the Caps Lock.
Emulate External Keyboard should be scanned if you do not have an external keyboard (IBM AT
or equivalent).
Note:
After scanning the Emulate External Keyboard barcode, you must power cycle your
computer.
Keyboard Modifiers
This modifies special keyboard features, such as CTRL+ ASCII codes and Turbo Mode.
C ASCII Mode On: The imager sends key combinations for ASCII control characters for
values 00-1F. Windows is the preferred mode. All keyboard country codes are supported. DOS
mode is a legacy mode, and it does not support all keyboard country codes. New users should
use the Windows mode. Refer to Keyboard Function Relationships, page 116 for CTRL+ ASCII
Values. Default = Off
Windows Mode C ASCII * C ASCII Mode Off