2.3
K16-LCD Keypad
Figure 7: K16-LCD Keypad
Using the K16-LCD keypad, the user can perform the following tasks:
∙
check the partition status (armed/disarmed);
∙
arm or disarm a partition;
∙
check about the beginning or active exit or entry delay;
∙
check the entire device status;
∙
find out if there is a power failure of the device;
∙
find out about the presence of faults.
2.3.1
Arming and Disarming
The device has the ability to arm and disarm several partitions with one user code. The partitions that can be
armed or disarmed with a specific code are configured during the device configuration.
Arming and Disarming without Partition Selection
If only one partition is assigned to the user code, then when typing the code, an attempt will be made to change
the security status of this partition:
∙
if the partition is armed, then when the code is being typed, it will be disarmed;
∙
if the partition is disarmed, the procedure for the partition arming will begin when the code is being typed.
16