C-more micro EA-MG6-BZ2, Hardware User Manual

Page: 183 / 189

L
Lost Firmware – Red ‘Update Mode’ Screen Displayed, 8–4
Low-Power Mode, 4–5, 5–10, 5–17, 8–3
M
Maintenance, 7–2
Check Operating Environment, 7–2
Check Operating Voltage, 7–2
Check Physical Conditions, 7–3
Check Project Functionality, 7–6
Check Settings under the System Setup Screens, 7–5
Check Transmit and Receive Indicators, 7–3
Checks from the C-more Micro-Graphic Programming Software, 7–6
Cleaning the Display Screen, 7–5
Project Backup, 7–2
Run Tests under the System Setup Screens, 7–4
Mounting Clip Screw Torque, 2–5
Mounting Clips, 4–3
P
Panel & PLC Error Code Tables, A–2
Allen-Bradley DF1 Protocol, A–7, A–8
Allen-Bradley DH485 Protocol, A–9, A–10
C-more Micro-Graphic Panel, A–3, A–4
DirectLOGIC – K-Sequence PLC, A–5
GE SNPX Protocol, A–12, A–13, A–14, A–15, A–16, A–17, A–18, A–19, A–20
Introduction, A–2
Mitsubishi FX Protocol, A–21
Mitsubishi Q / QnA Series, A–21, A–22
Omron FINS Protocol, A–25, A–26, A–27
Omron Host Link Protocol, A–24
Siemens PPI Protocol, A–29
Panel Cutout Dimensions (all models), 4–4
Panel Dimensions, 2–5
Panel Errors, 8–9
Panel Objects, 3–4
i–3
Index
EA1-MG6-USER-M Hardware User Manual, 1st Ed. Rev C, 09/10 ®