9
Note:
1.If the remote control does not work properly, please check/replace the batteries.
Key
Function
1
Power Key After pressing, the camera
enters standby mode
2 P/T RST Key After pressing, the camera
enters self-check
3
Flip Key
4
Camera
Select Key
Select the camera to be
controlled
5
BLC Key
6
Menu Key
Enter/Exist Menu
7 Camera PTZ
Control Key
Press HOME button, the
camera returnto the middle
position
8
Preset
Reset Key
Press "Reset"+Number(1-9)
to reset the corresponding
Preset
9
Preset
Setting Key
Press "Preset"+Number(1-9)
to save the corresponding
Preset
10 Focus Key
[AUTO]:Automatic focus
[MANUAL]: Manual focus
[FAR]: Manual focus, make
the far object clearer
[NEAR]: Manual focus, make
the near object clearer
11 Zoom Key + increase, - decrease
12 Number Key Cooperate with setting /
calling Preset
①
②
③
④
⑥
⑤
⑦
⑧
⑨
⑩
⑪
⑫
2.If there is an object obstruction between the remote controller and the remote
control special sensor on the camera, the camera may not work properly. Make sure
there is a clear path between the remote controller and the remote sensor on the
front part of the camera.