29
7. Installation Instruction
Pendent
：
1. Twist a pair of PM3 * 8 screws on each side of the bracket (keep half out
hooking). 2. using one of the brackets to the ceiling with four expansion screws (STP4 * 16) (as
like picture A). 3. Secure the other bracket to the bottom of the camera with 4 pieces of PM *
8 screws (orientation as like picture B). 4. The two brackets mismatch facing the fit, from left
to right side of the bracket hook screws to the side of the slot in another bracket, from front to
back so that the two brackets close. Finally, tighten the screws on the side of the bracket
（
as
like picture C
）
Wall mounting:
1. Secure the wall bracket to the wall (Figure E).
2. Fix the camera D to the stand (Figure F).
