12
Fig.9.3.b : Selected Status Screen
Fig.9.3c : C-20A Parameter Setting Interface Screen 2
Parameter
Range
Description
Auto ON
ON/OFF
When the Auto ON is set to “ON”, the user can wear
the mask and take 3 breaths in device’s Standby State.
The device will then automatically enter into the
Working State.
Auto OFF
ON/OFF
When the Auto OFF is set to “OFF, the user needs to
remove the mask while the device is in the Working
State. Within 15 seconds the device will automatically
enter into the Standby State. When this function has
been turned ON, the device will automatically enter
into the Standby State whenever the user’s mask falls
off or the tubing becomes disconnected while the user
is asleep.
* Mode
APAP/C
PAP
The APAP mode allows pressure to be automatically
adjusted for improved user comfort based on continual
monitoring of apnea and snoring events. The CPAP
mode provides a constant level of pressure throughout
the breathing cycle.
