Standard Spec Build Notes
If you are building your Overdrive 2 kit to standard tubescreamer specs, before you begin,
you should be aware that there are several spaces on the PCB that should be left empty.
There are 5 resistor spaces, 6 diode spaces, and 2 transistors spaces, highligted in the
diagram above that should be left empty. Do not add any components to these spaces.
Omitt these components. There are no component values that need to be changed from
what is labelled on the PCB.
Just be aware of this for now. You will be reminded throughout the populating the
PCB portion of the instructions as we come to each relevant component.
