MOSFET Spec Build Notes
If you are building your Overdrive 2 kit to MOSFET specs, before you begin, you should
be aware that there are several spaces on the PCB that need to be left empty and several
component values that need to be changed from what is labelled on the PCB.
1.
Leave the one 1M resistor space, the two 511k resistor spaces, and the two red LED
clipping diode spaces highlighted in RED empty. Do not add any components to
these spaces.
2.
Use 1M resistors in all the resistor spaces that are highlighted in orange.
3.
Change the 100k resistor highlighted in yellow to a 1M resistor.
