BYK LC 4, Operating Manual

Page: 40 / 61

Operation BYK LC 4
40
Note
If the timer has been stopped you can
!
Reset the timer to the adjusted timer interval with <
R
> .
!
Terminate the timer and switch to the measured value display with
<
E
> .
4.11 Switch-off interval
The automatic switch-off function switches off the meter automatically if no
entry is made for a specified time (switch-off interval). This saves the battery
of the meter.
You can specify the switch-off interval yourself. The switch-off interval is from
10 minutes minimum to 24 hours maximum.
7 If necessary, stop the timer before the time has expired with <
g
>
and make it continue with <
g
> .
8 As soon as the time has expired the alarm signal sounds.
Switch off the alarm signal with
<
(
> . The timer goes on counting
with a negative sign.
9 Stop the timer with <
g
> .
1 Switch on the meter with <
(
> .
The display test is displayed.
2 During the display test (approx. 2 sec.):
Display the switch-off interval with
<
M
> .
3 Select a switch-off interval with <
>
> and <
<
> .
4 Confirm the setting with <
g
> .
The display switches to the measured value display.
The automatic switch-off function switches off the meter if no entry is
made during the switch-off interval.
min:s
CLR
d
Day.Month
MEM
CAL
C
pH
LoBat Ident Lap
mV
RESET
LAP
ESC
O f F
0 0 0 4
t
h:min