BYK LC 4, Operating Manual

Page: 32 / 61

Operation BYK LC 4
32
4.9 Saving
The BYK LC 4 meter has a data memory. Up to 50 measurement datasets
can be stored in it.
A dataset consists of:
!
Main measured value (conductivity, specific resistance, salinity or TDS)
!
Measured temperature value
!
Time and date
!
ID number (0000 - 9999)
4.9.1 Saving measured data
You can save measured data as follows:
1 Open the save menu with <
M
> .
The memory number of the next free memory location is displayed
under the current measured value.
The
X
status indicator appears.
2 Switch to the display of the ID number with <
g
> .
The ID number that was last entered appears on the display.
3 If necessary, edit the four-digit ID number with <
5_
> and <
6_
>
[ < ID number > ].
4 Using <
<
> and <
>
> , enter the required ID number (0 ... 9999).
The selected display flashes.
5 Confirm the ID number with <
g
> .
6 Save the measurement dataset with <
g
> .
or
Cancel the storing procedure without storing by pressing
<
E
> .
C
MEM
CAL
RCL
TDS
CellTC
S
SAL O
2
TC
RESET
Cell
LAP
m
mbar
mg/l
CAL
LoBat Day.Month h:min min:s Ident Lap
CLR
Lin
Tref20 Tref20
M cm
k cm
Sal
1
cm
K
S/cm
ESC
1 3 1 4
0 0 1 0
Tref25
nLF
STO