Terminal block is not included. For the installation
qualified personnel may be required. (we
recommend MAMMUT/FORBOX 1,5mm
2
)
To ensure equipment safety you must carefully follow the instructions below. This leaflet must be kept handy by personnel entrusted with all ordinary and
extraordinary maintenance.
• Before any installation or maintenance operation on the bulb, make sure it is disconnected from power.
• Fit the correct bulbs, according to the type and power indicated on the lamp data label.
• Make sure the lamp technical features are compatible with the use you are going to make of it.
• Should you have any doubt, refer to the dealer or ask an electrician.
• When connecting to the mains, fallow the correct colour code far power cables: (N) blue, (L) brown or black and, only far class I equipment, (T)yellow/green.
• When lamps are to be fitted to the wall directly through their ceramic parts, fasten the fixing screws lightly, to avoid breaking the ceramic.
• To clean the lamp on the outside, use a soft cloth, possibly wet. Do not use solvents or abrasive products. No liquid must get in contact with the lamp interior
parts.
• Do not touch the equipment with dirty hands.
= Minimum distance to be observed from all lit up objects.
= Replace immediately the safety glass, if damaged, with the original part.
= The lamp uses low pressure bulbs, and needs no protection glass.
= Device with CE marking
= The equipment at the end of its life must be collected separately from other waste
= Class I equipment, must be connected to an earth terminal.
= Double insulated lamp, does not need earthing.
= Electrical equipment in class III, electrical safety guaranteed by low voltage tension, does not require grounding
IMPORTANT
13
12
11
991 South Gull Lake Dr Richland, MI
49083
USA
www.byiba.com
1-877-964-4646
