BYE BIKE ONE&ONE, Owner'S Manual

Page: 49 / 64

Pre-load adjustment.
Adjusting the rear suspension
You can adjust the pre-load on the rear
shocks to adapt your vehicle to load.
To set pre-load, turn the knob to the left
or right to the desired position. Position 5
provides the lower pre-load while 1 offers
the highest pre-load.
Use a special wrench for suspensions to
perform this task.
Pre-load levels: 5. Minimum pre-load - 1. Max-
imum pre-load.
6.14 Steering
Steering check
49
Maint
enance
Worn or loose steering bearings may
cause danger. Therefore, steering must be
checked as follows at the intervals specified
in the service schedule.
To check the steering operation, place
the vehicle on the centerstand, hold the
lower ends of the front fork legs and try to
move them forward and backward. If any
free play can be felt, have a BYE BIKE
dealer check or repair the steering.
6.15 Wheels bearings
Wheels bearings check.
The front and rear wheel bearings must
be checked at the intervals specified in
the service schedule. To check the wheels
bearings, place the vehicle on the cen
-
terstand, hold front fork legs (for the front
wheel) or the swing-arm (for the rear wheel)