BYE BIKE ONE&ONE, Owner'S Manual

Page: 16 / 64

W
arr
ant
y card and service r
ecord
16
SERVICE RECORD SERVICE RECORD
7.000 KM
5th INSPECTION
(BORNE BY THE CUSTOMER)
3.000 KM
2rd INSPECTION
(BORNE BY THE CUSTOMER)
KM KM
DATE DATE
DEALER STAMP AND SIGNATURE DEALER STAMP AND SIGNATURE
5 3
PARTS TO BE SERVICED PARTS TO BE SERVICED
SERVICE RECORD
5.000 KM
4th INSPECTION
(BORNE BY THE CUSTOMER)
KM
DATE
DEALER STAMP AND SIGNATURE
4
PARTS TO BE SERVICED
The next revision to be made: within
2000 km. This period should be reduced
for intensive use of the vehicle or driving
in extreme heat or cold climates. Is the
customer's responsibility to effectuate
the successive service works and that
the authorised BYE BIKE dealer fills the
service record. If this document is not
properly completed may lead to the loss
of warranty.
Fuel line inspection
Replace the air filter element
Replace spark-plug
Replace transmission oil
Inspect the battery
Check the brakes and the
pads/discs condition
Inspect and lubricate the brake
levers and cables
Inspect the suspensions
Check the steering bearings
and the steering operation
Adjust the carburettor and the
engine idling
Inspect (and, if necessary,
change) drive belt
Inspect (and, if necessary,
replace) variator rollers
Inspect the operation of lights,
switches and horn.
Inspect the operation of the
throttle and throttle cable
Inspect the wheels
Inspect the wheels bearings
Lubricate the centerstand
Inspect, adjust and lubricate
the drive chain
Tyres and tyre pressure check
Check all the bolts are tight
General grease
Test ride the vehicle
Fuel line inspection
Clean the air filter element
Replace spark-plug
Inspect the battery
Check the brakes and the
pads/discs condition
Inspect and lubricate the brake
levers and cables
Inspect the suspensions
Check the steering bearings
and the steering operation
Adjust the carburettor and the
engine idling
Inspect (and, if necessary,
change) drive belt
Inspect (and, if necessary,
replace) variator rollers
Inspect the operation of lights,
switches and horn
Inspect the operation of the
throttle and throttle cable
Inspect the wheels
Inspect the wheels bearings
Inspect the oil pump
Lubricate the centerstand
Inspect, adjust and lubricate
the drive chain
Tyres and tyres pressure
check
Check all the bolts are tight
General grease
Test ride the vehicle
The next revision to be made: within
2000 km. This period should be reduced
for intensive use of the vehicle or driving
in extreme heat or cold climates. Is the
customer's responsibility to effectuate
the successive service works and that
the authorised BYE BIKE dealer fills the
service record. If this document is not
properly completed may lead to the loss
of warranty.
Fuel line inspection
Clean the air filter element
Replace spark-plug
Inspect the battery
Check the brakes and the
pads/discs condition
Inspect and lubricate the brake
levers and cables
Inspect the suspensions
Check the steering bearings
and the steering operation
Adjust the carburettor and the
engine idling
Inspect (and, if necessary,
change) drive belt
Inspect (and, if necessary,
replace) variator rollers
Inspect the operation of lights,
switches and horn
Inspect the operation of the
throttle and throttle cable
Inspect the wheels
Inspect the wheels bearings
Inspect the oil pump
Lubricate the centerstand
Inspect, adjust and lubricate
the drive chain
Tyres and tyres pressure
check
Check all the bolts are tight
General grease
Test ride the vehicle
The next revision to be made: within
2000 km. This period should be reduced
for intensive use of the vehicle or driving
in extreme heat or cold climates. Is the
customer's responsibility to effectuate
the successive service works and that
the authorised BYE BIKE dealer fills the
service record. If this document is not
properly completed may lead to the loss
of warranty.