BYE BIKE ONE&ONE, Owner'S Manual

Page: 32 / 64

3.9 Accessories
fastening system
1. Frame rear part.
2. BYE BIKE original accessory.
3. Screws.
Your BIKE BYE is equipped with a smart
fastening system that enables a fast and
secure way to install accessories on the
rear part of the chassis. Only BYE BIKE ac
-
cessories have been developed along with
the vehicle and guarantee your safety.
Installing an accessory
1. Slide the carrier tubes inside the tubes
of the rear part of the frame.
2. Fit the mounting gently until the two
side holes are aligned.
3. Tighten the two side screws with an
Allen key to secure the assembly.
Instrument and control functions
32
Disassembling an accessory
1. Unscrew and remove the two side
screws with an Allen key.
2. Pull gently to remove the accessory.
CAUTION
Do not exceed the maximum load of
150kg for the vehicle.
3.10 Fuel tap
1. Closed tap. 2. Open tap.
Manual fuel tap
Your BYE BIKE may be equipped with a
manual fuel tap. When you do not use the
vehicle, select "OFF" (1) position to prevent
fuel leaks. Before using your vehicle select
"ON" (2) position to feed the carburetor with
fuel.
Automatic fuel tap
If your BYE BIKE is equipped with an
automatic fuel tap, this device will automati -
cally adjust the fuel flow.