BYAN SYSTEMS, INC.
Automated Gate and Access Control Products
413 Linden • Lusk, WY 82225 • (800) 223-2926
2
G2M Control Board Layout:
Description:
The Byan Systems G2M control board is a single phase, microprocessor controlled unit.
It is capable of controlling up to two 3/4 hp 115V or 220V AC motors. Board voltage is field
selectable with good soldering skills and high quality soldering tools. Three different plug-in
accessory cards are available for the G2M. A leaf delay card comes standard with every board.
A traffic light card and a receiver card are available separately. There are three timing
potentiometers as well as nine DIP switches incorporated into the board to control different
output functions.
Terminal Strips:
There are two sets of terminals on the G2M control board. The first terminal strip is the
power and motor run terminal block located on the left side of the board below the transformer.
This is where the incoming commercial power and the outgoing power to the operators are
connected.
The second terminal strip is the accessory terminal strip. This is where all accessory
connections are made.
