Byan System G2M Installation And Operation Manual Download

Page: 4 / 16

BYAN SYSTEMS, INC.

Automated Gate and Access Control Products

413 Linden • Lusk, WY 82225 • (800) 223-2926

Power and Motor Run Terminals

Terminal
Number

Terminal Name/Description

Commercial Power Input Neutral (White 115V) or Hot (Black 220V)

Commercial Power Input Hot (Black-115V or Red-220V)

Motor One Close Directional (Black)

Motor One Open Directional (Red)

Motor One Common (White)

Motor Two Close Directional (Black)

Motor Two Open Directional (Red)

Motor Two Common (White)

Commercial Power Hook-Up*:

Hook up commercial power to terminals 1 & 2 of the power and motor run terminal strip.

Connect leads from the #1 operator to terminals 3, 4, & 5 of the power and motor run
terminal strip.

Connect leads from the #2 operator to terminals 6, 7 & 8 of the power and motor run
terminal strip.

Connect motor run capacitors across each set of directional motor leads (between
terminals 3 & 4 and terminals 6 & 7).

*See conversion table on pg. 6 for corresponding terminal blocks in the Byan Prewires.

Summary of Contents for G2M

















Search results

Summary of Contents for G2M

Reviews:

Related manuals for G2M

Brands by name

Popular brands

Byan System G2M, Installation And Operation Manual

Search results

Summary of Contents for G2M

Reviews:

Related manuals for G2M

Brands by name

Popular brands