7
Programming the control panel
1. Hold glass under the dispensing valve.
2. Press button 1 and button 2 simultaneously until LED in the centre lights
up.
3. Fill glass by pressing one of the buttons 1, 2 or 3.
4. Press button 4 “Cancel” when the desired volume in the glass is reached.
By doing so total running time is saved.
5. Repeat this for the other 2 buttons.
6. Repeat the above for the other control panels.
Button 1:
Portion size “Small
Button 2:
Portion size “Medium”
Position of LED
Button 3:
Portion size “Standard”
Button 4:
Interrupt dispensing or Manual
dispensing
Note
: Changes in pressure will change the pre-set volumes. Therefore it’s
important to keep the pressure on the same level after programming the control
panels.
Programming and usage of the control panel
