5
Thermostats are set up to hold the red wine area at a temperature of 64.4°F and
the white wine area at a temperature of 42.8°C. Take following steps to change
set-up:
Push SET button until the icon showing degrees Celsius starts flashing. Now,
the temperature may be changed by ▲ and▼ push buttons.
1. To confirm the new temperature, push the SET button once again.
2. If the SET button is pushed once, the thermostat will give the current
temperature in the wine dispenser.
If problems with the cooling sensors arise, symbols E-1, E-2 will appear on the
display. However the cooling system will not switch off and after some time,
the ice growth will occur again. If this happens, contact your servicing
department of By The Glass.
This light shows that defrosting program is in the
course.
The data show that the compressor is running.
The temperature can be increased with this button.
The temperature can be decreased with this button.
Hold the SET button for several seconds to set the
temperature.
Press the SET push-button once for indication of
real temperature.
Electronic Digital Thermostat
