[- - - TFS -] : alarm active from Thursday to Saturday inclusive
[M - W - F - -] : …
[- T- T - S -] : …
Principal :
when the initial of the day is displayed, the alarm is active on that day.
•
To change the Day setting, press MENU (the setting blinks), then use the UP/DOWN arrow keys to scroll
through to the desired day combination.
•
Validate the setting selected by pressing the MENU key again: the day setting stops blinking, and the
hour starts to blinks indicating that this value may be modified.
•
Set the alarm trigger time using the UP/DOWN arrows, then validate the hour displayed on screen by
pressing the MENU key. The hour setting stops blinking, the minutes start to blink and may be modified.
•
Set the minutes using the UP/DOWN arrows, then validate the selected value by pressing the MENU key:
the alarm 1 time setting is displayed on screen (fixed, not blinking): the alarm will be triggered on each
day displayed at the time displayed ( therefore at the same time on each active day).
Nota bene 1:
To confirm a value without modifying it, simply press MENU to move to the next parameter.
Press the UP arrow to move on to Alarm 2 and repeat the procedure, then set alarm 3 and so on.
Nota bene 2 :
to pass directly to the next alarm without modifying the alarm displayed, simply press the UP
arrow.
After reviewing all 9 alarms, press the UP arrow the "Alarms sub-menu" screen is displayed. To return to
the default screen press the MENU key.
When an alarm goes off, the control panel emits a series of beeps and displays the time as well as a
message indicating the number of the active alarm. This will last for one minute, or until a key on the touch
pad is pressed.
Nota bene 3 :
to deactivate an alarm, choose the day setting [- - - - - - -]. The alarm time will remain saved to memory
to facilitate future resetting if required.
Nota bene 4 :
it is possible to set up to 9 alarms per day.
5.6
Stand-by cycles sub-menu
With the spa in AUTO mode, this menu allows the user to programme up to 9 separate stand-by cycles
per week.
At the beginning of each cycle, the spa shuts itself down (filtration and heating are stopped), then at the
end of the cycle the spa starts up again.
This function is useful, notably to shut the spa down at the night or at times during the week when the spa
will not be used (during working hours for example).
Nota bene 1 :
The spa may be used in MANUAL mode during a stand-by period without reprogramming the stand-by
cycles.
40/48
2020/10 - Indice de révision : D - Code : 38050
SPAS
SPAS
