8.
Press the UP key 3 times to come back to the "Other options" sub-menu ;
9.
Press the MENU key to return to the default screen.
It is possible to leave a menu, sub-menu or function when the screen displays "ESC" below the MENU key;
to do so simply press this key, the default screen is displayed. It is not possible to reascend intermediate
menu levels.
5.2
Temperature setting function
This function allows you to set the desired temperature (set point) and to ensure that, outside
stand-by periods, the water temperature does not drop significantly below this set point.
The allowed temperature range is between 10°C and 41.5 °C, in 0.25°C increments.
Upon accessing the "T°C setting" function, the current temperature set point is displayed on screen
(in °C with 2 decimals).
To change this value, press MENU: the temperature begins to blink, indicating that it may be modified by
pressing the arrow keys (hold an arrow key down to scroll quickly through the allowed values).
Once the desired value is displayed on the screen, press MENU, the new set point is saved and the
screen returns to the default display.
5.3
Timer function
The timer is a count down function, it can be set from 1 to 99 minutes. The user starts the countdown
on entering the spa to remind him/her, after a set time, that it is time to get out.
Upon accessing the Timer function, the current timer setting is displayed on the screen.
Press MENU to change this value: the timer value begins to blink indicating that it may be modified by
pressing the UP and DOWN arrows (hold an arrow down to scroll quickly through the allowed settings).
Once the desired value is displayed on screen, press MENU, the count down starts.
The message "start TIMER" is displayed on screen for 5 seconds, press the MENU key again to stop the
timer.
While the timer is counting down, the remaining time is displayed on the bottom right of the screen.
Every 10 seconds, a double beep sounds, a long beep indicates the end of the of the timed period and
"Timer end" is displayed on the screen.
5.4
Time function
This function allows the user to set the time and day displayed on the LCD screen. The clock
and its settings are also used to programme stand-by periods.
The time may be displayed according to either the 12 hour or 24 hour clock. This setting will determine
how both user alarms and stand-by period start and stop times are shown.
Upon accessing the "Time" function, the following screen is displayed:
3. TIME
(▼) (OK) (▲)
10:35
PM
Each of the TIme function parameters must be modified or confirmed one after another in the following
order (when a value may be modified, it blinks):
38/48
2020/10 - Indice de révision : D - Code : 38050
SPAS
SPAS
