15
15
15
15
15
GB
GB
GB
GB
GB
Set
Set
Set
Set
Set Press
SL 1
SL 1
SL 1
SL 1
SL 1
Wait 10 sec. Dots stop flashing.
The pressure appears in the display
0.0 P
0.0 P
0.0 P
0.0 P
0.0 P, when no water is used.
A third filter must be set to SL 2
SL 2
SL 2
SL 2
SL 2 and a fourth to SL 3
SL 3
SL 3
SL 3
SL 3.
Disconnect and reconnect all filters to the mains.
The filters will be backwashed in sequence: Master
Master
Master
Master
Master,
SL 1
SL 1
SL 1
SL 1
SL 1, SL 2
SL 2
SL 2
SL 2
SL 2 and SL 3
SL 3
SL 3
SL 3
SL 3.
The time until the next backwashing
time until the next backwashing
time until the next backwashing
time until the next backwashing
time until the next backwashing and the pres-
pres-
pres-
pres-
pres-
sure difference
sure difference
sure difference
sure difference
sure difference appear alternately in the master
filter display. The pressure difference is only dis-
played for large volumes of water.
Only the pressure difference
Only the pressure difference
Only the pressure difference
Only the pressure difference
Only the pressure difference appears in the slave
filter display.
The filters are ready for use.
Operation
Operation
Operation
Operation
Operation
We recommend programming the filter so that the
We recommend programming the filter so that the
We recommend programming the filter so that the
We recommend programming the filter so that the
We recommend programming the filter so that the
device is backwashed at least once a month to
device is backwashed at least once a month to
device is backwashed at least once a month to
device is backwashed at least once a month to
device is backwashed at least once a month to
prevent foreign particles from adhering to the fil-
prevent foreign particles from adhering to the fil-
prevent foreign particles from adhering to the fil-
prevent foreign particles from adhering to the fil-
prevent foreign particles from adhering to the fil-
ter element (more frequently for higher levels of
ter element (more frequently for higher levels of
ter element (more frequently for higher levels of
ter element (more frequently for higher levels of
ter element (more frequently for higher levels of
soiling; factory setting every 7 days).
soiling; factory setting every 7 days).
soiling; factory setting every 7 days).
soiling; factory setting every 7 days).
soiling; factory setting every 7 days).
Setting the backwash interval
Setting the backwash interval
Setting the backwash interval
Setting the backwash interval
Setting the backwash interval
Should the local water quality (degree of contami-
nation) change, the backwashing interval must be
corrected; see commissioning.
Manual backwashing
Manual backwashing
Manual backwashing
Manual backwashing
Manual backwashing
Unplugging and plugging in the device can back-
wash it at any time.
Display
Display
Display
Display
Display
The time until the next backwashing and the pres-
sure difference appear alternately in the display.
The pressure difference is only displayed for large
volumes of water.
Cleaning
Cleaning
Cleaning
Cleaning
Cleaning
Clean plastic parts with a soft, damp cloth only; do
not use solvents, detergents, or acidic cleaning
agents.
Set
Set
Set
Set
Set
