Cleaning, maintenance and repairs
58
Unloading Technology V-LOAD Shear Top + Mega
2007). The period of use will, thus, end in October of 2013.
10.4.4
Installing and removing hydraulic hose lines
When installing and removing hydraulic hose lines, it is imperative
that you observe the following instructions:
Use only hydraulic hose lines supplied by the manufacturer.
Pay attention to cleanliness.
Install hydraulic hose lines in such a way that, in all operating
conditions:
there is no tensile stress except that caused by the hoses'
own weight,
there is no stress from compression on shorter hose lines,
there is no mechanical impact on hydraulic hose lines.
Make sure that hydraulic hose lines cannot rub against
components or against one another by arranging and
fastening them properly. Protect hydraulic hose lines with
protective sleeves if necessary. Cover sharp-edged
components.
the bending radii are not below the permissible parameters.
Select the size of the hydraulic hose line connected to moving
parts in such a way that:
the bending radius is not below the smallest permissible
bending radius in the entire area of movement,
the tensile load on the hydraulic hose line is not outside the
permissible parameters.
Fasten the hydraulic hose lines at the designated attachment
points. Avoid any additional hose brackets which impair the
natural movement and length adjustment of the hydraulic hose
lines.
It is prohibited to refinish hydraulic hose lines.