Commissioning
44
Unloading Technology V-LOAD Shear Top + Mega
6.1
Checking the operation of the accessory equipment
Check the accessory equipment for proper operation before putting it
into service for the first time and every time before starting to work:
1. Hitch the accessory equipment to the tractor.
2. Make sure the accessory equipment is lubricated in accordance
with the lubrication chart, see chapter "Lubricating", starting on
page 54.
5. Make sure that no one is inside the work area, start the tractor
and check all functions of the accessory equipment before
cutting the first silage block:
5.1 Open / close cutting bar.
5.2 Extend / retract hydraulic upper link (option).
5.3 Extend / retract hydraulic push-off system (option).
5.4 Raise and lower hydraulic lifting frame (option).