Safety instructions
12
Unloading Technology V-LOAD Shear Top + Mega
2.3.1
Responsibilities of the owner
The owner is required to:
observe all national, generally applicable regulations regarding
safety and accident prevention as well as environmental
protection,
limit work with / on the accessory equipment to personnel who:
are familiar with all general safety and accident-prevention
regulations,
have been instructed in how to work with / on the accessory
equipment,
have read and understood this operating manual.
keep all warnings attached to the accessory equipment legible at
all times,
replace damaged warnings,
provide personnel with the necessary personal protective
equipment such as:
safety goggles,
work gloves according to DIN EN 388,
safety shoes,
protective suit,
skin protection, etc.
2.3.2
Responsibilities of the operator
Before commencing work, all personnel designated to work with/on
the accessory equipment are required to:
observe all national, generally applicable regulations regarding
safety and accident prevention as well as environmental
protection,
read and observe chapter "Safety instructions", starting on
page 9 of this operating manual,
read the chapter "Warnings and instructions", starting on
page 26 of this operating manual, and observe the warnings
while operating the accessory equipment,
become familiar with the accessory equipment,
read the chapters in this operating manual that are essential for
the execution of the work tasks they have been assigned.
If detecting that a fixture is no longer fully compliant with the safety
regulations, the operator is required to remedy this defect
immediately. If the correction of a fault is not part of the operator's
responsibilities or the operator lacks the necessary expertise, the
operator must report the defect to his supervisor or the owner.