Bushnell TROPHY 119598, Instruction Manual

Page: 26 / 320

26
Parameter
Settings
( Bold =default)
Description
Set Field Scan
ON, OFF
(After ON is
selected): “A” Start/
Stop, “B” Start/Stop,
Interval
Note: Field Scan
images are not
transmitted
wirelessly.
Turns Field Scan (Time Lapse)
recording mode on/off. When acti-
vated, Field Scan forces the camera
to take photos or videos even when
it is not triggered by a nearby live
animal, useful for constant monitor-
ing of an area that might be far
away from the camera. The user
can set the start and stop times for
up to two independent “blocks” of
Field Scan recording, as well as the
interval time between each photo/
video. To ensure correct operation,
avoid setting overlapping start/stop
times for Field Scan A and B. Please
read the “Field Scan 2x…” section of
this manual for details on using this
feature (pg.18) . NOTE: If the "Camera
Mode" parameter is set to "Day"
or "Night" operation only, that will
take priority over your Field Scan
settings. Set Camera Mode to "24HR"
if you are setting day and night Field
Scan start and/or stop times.
Coordinate
Input
ON, OFF
See "Using the
Setup Menu Input
Screens"
Allows the user to input latitude
and longitude coordinates for the
camera’s location. This data will
be embedded in the files saved
on the camera’s SD card (if “On” is
selected). This makes it possible
to see each camera’s location as a
“pushpin” on Google Earth maps
when reviewing a folder full of
photos from multiple cameras,
or use other “geotag” capable soft-
ware (Picassa, etc). See pg. 31