Bushnell TROPHY 119598, Instruction Manual

Page: 15 / 320

15
• Press the OK key to review a photo or video on the display. See
"Reviewing Images on the Color LCD" , on pg. 36 for more details.
USING THE SETUP MENU TO CHANGE SETTINGS
The main purpose of the SETUP mode is to allow you to change the settings of
the camera’s parameters (21 different ones are available!) so your WIRELESS
Trophy Cam HD operates exactly the way you want it to. You will do this by
entering the SETUP Menu and pressing the keys below the LCD display, which
will show you each parameter and its setting.
Changing Parameter Settings in SETUP Mode
A wide range of options or “parameters” are provided to allow you to set
the WIRELESS Trophy Cam HD to your operational preferences. To change
the setting of any parameter you must first switch to the SETUP mode.
Once in SETUP mode, pressing the MENU button will allow you to select
any parameter and change its setting. The name of the parameter and its
current setting will be shown on the LCD. Pressing the RIGHT or LEFT key
scrolls to the next or previous parameter (RIGHT key to move on to the next
parameter and LEFT key to go back to the previous parameter), and pressing
the UP or DOWN key lets you select a different setting for the currently
displayed parameter. Once you have selected your preferred new setting for
a parameter, press the OK button to save the new setting (actually change it).
When you are finished changing the settings of one or more parameters, press
MENU
again to exit the SETUP menu. MENU can also be pressed anytime you
want to cancel changing a parameter’s setting after a new setting has been
selected (but
OK
has not been pressed yet). After setting the parameters to
your preferences, be sure to move the switch to ON to begin actually taking
photos or videos. No images will be captured if the switch is left in the SETUP
position (unless you press the RIGHT /Shot key after exiting the menu) -in fact, the
camera will power off automatically after a few minutes with no key pressed.
Parameter Settings Display
The settings for each parameter are shown on the display screen of your
WIRELESS Trophy Cam HD. All the available settings for the currently
displayed parameter are shown on one screen, with a checkmark next
to the current setting (Pg. 16, Fig. 4a) . To change the setting, first use
the UP/DOWN keys to highlight (select) the new setting you want (Fig.
4b) , then press OK to “Execute” the actual change to the selected setting.