To conserve energy the display in the Homing Mode will show 3
‘bars’ instead of the current bearing, and the segments will not be
displayed after 1minute. To activate the display again you must press
COMP
. To exit the Homing Mode press
MODE
again to return to
default Compass Mode.
A
UTO
B
ACK
L
IGHT
Press the
LIGHT
button to turn on LCD backlight for 5 seconds.
Night Mode
Night Mode allows the backlight to come on automatically when any of the function keys are
pressed except when the compass is in Compass Mode. Press and hold down
LIGHT
button for
3 seconds, and the Night Mode icon (represented by the light symbol) appears. To turn off press
and hold down
LIGHT
button until the light symbol disappears.
B
ATTERY
Installing a Battery
To open the battery compartment cover, insert a coin in the coin slot
and rotate cover in a clockwise direction until it lifts open. Insert the
lithium cell (battery type: CR2430) into the compartment, making
sure that the negative polarity faces downwards. Close battery
compartment cover until it clicks shut.
Low Battery Indicator
A blinking battery icon will appear when the battery is low. The
battery compartment is on the back of the compass. Replace the
used battery with a CR2430 lithium battery. Note: The watch is
automatically reset when the battery is removed.
Battery Life
Your DNS is designed for continuous use and batteries will last over one year with regular usage.
Heavy use of the alarms, light, or compass will shorten battery life.
unsuccessful, the Cardinal Points will blink and you will have to repeat the previous 4 steps again.
To skip setting the declination, press the
ADJ
button to return to the Compass Mode.
Declination Setting
Declination adjusts the compass for the local magnetic fields. In
some areas, magnetic declination can be considerable, so it is a good
idea to check for declination on your map or on the Internet. To
adjust the compass declination angle, go to Compass Mode and hold
down
ADJ
button for 3 seconds, and the Compass Homing Mode
is displayed. Press
MODE
button until you get into Declination
Setting Mode displayed as ‘DEC’. Press
UP
or
DOWN
button for
desired value then just press
ADJ
button to save settings and exit the
mode. Declination is sometimes measured as degrees positive and
negative. Degrees East are considered positive and Degrees West are
considered negative. For example, to change from 3 degrees East
(positive) declination to 3 degrees West (negative) press the
DOWN
button until 3W appears.
Self Homing Mode
Allows you to preset a reference bearing which tells the Compass to
alert you to the direction you should be heading. Go into Compass
Mode and press
MODE
button to display compass Homing. To
adjust homing bearing, press and hold
ADJ
button for three
seconds. Press
UP
button or
DOWN
button to adjust to desired
bearing setting. Pressing
UP
or
DOWN
will increase or decrease
bearing by increments of ten. A single push of
UP
or
DOWN
moves
bearing by 1 degree. When done, press
ADJ
to return to Homing
mode. To return to Compass Mode press
MODE
button.
To operate the compass in Homing Mode go into the Compass Mode first, then press
MODE
button to get into Homing Mode.
The main reading displays the actual bearing and the lower reading shows the ‘home’ bearing. The
segments on the circumference show the difference between the two bearings, which can be used
to redirect you to stay on course.
9
8