For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105
40
Connectivity Functions
Connecting to a Wired Network
For connecting to a wired LAN network, you
should perform the following steps:
•
Connect broadband ISP connection ethernet
cable to the ETHERNET INPUT of your modem.
•
Ensure that Nero Media Home software
is installed to your PC.(for DLNA function).
See Appendix G for more information on the
installation process.
•
Afterwards, you should connect your PC to
the one of your modem’s LAN connectors (e.g.
LAN 1) by using a proper LAN cable.
•
Use another LAN output of your modem (e.g.
LAN 2) to enable the connection to your TV. You
can add your TV to your LAN by connecting the
LAN port at the rear of your TV to your modem’s
LAN connector as illustrated (fig.
1
).
• To access and play shared files, you must
Select Media Browser. Press Menu button and
select Media Browser by using Left or Right
button. Press OK to continue. Select the desired
file type and press OK. You must always use the
Media Browser screen to access and play shared
network files.
•
PC/HDD/Media Player or any other devices
that are DLNA 1.5 compatible should be used
with wired connection for higher playback quality.
To configure wired settings please refer
Network Settings section in Settings menu.
•
You might be able to connect your TV to
your LAN network depending on your network’s
configuration. In such a case, use an ethernet
cable to connect your TV directly to the network
wall outlet (fig.
2
).
Lan(Ethernet cable)
Broadband ISP
Connection
Rear of TV
The modem port
on the wall
Rear of TV
fig
.1
fig
.2
