Bush ESI01U, Instruction Manual

Page: 37 / 60

Using your Stereo DAB/FM Radio
Let’s get started
of these instructions, or online at www.argos-support.co.uk If you still require
further assistance, call one of our experts on 0345 600 3021.
Using your Stereo DAB/FM Radio
37
Note:
The current DRC setting will have an ‘*’ in the display.
4.
Short press the Menu button to exit the Menu options.
FM Radio mode
• If you are not already in FM mode, short press the Mode
button (under the top cover) to go to FM mode (check the
display).
• If you were listening to an FM station when you switched
the Radio off then this station will be automatically selected
when you switch the Radio back on.
Telescopic aerial
Please make sure that the aerial is fully extended before
you attempt to tune to a FM station (a vertical position is
recommended). This will ensure that the maximum signal
strength is available when the radio begins to scan. Extending
the aerial also ensures the best possible sound quality.
Tuning to an FM station
• Short press the Scan button (under the top cover) to scan
up the frequency band. Your radio will search for the next
available station and stop on that station.
• Long press the Scan button (under the top cover) to scan
down the frequency band. Your radio will search for the
next available station and stop on that station.
• You can use the rotary Tune/Select control to fine tune each
frequency in 0.05MHz steps or to scroll through the FM
frequency band.