Bush ESI01U, Instruction Manual

Page: 34 / 60

Using your Stereo DAB/FM Radio
Let’s get started
If you require any technical guidance or find that your product is not operating as
intended, a simple solution can often be found in the Troubleshooting section
Using your Stereo DAB/FM Radio
34
Note:
If there is already an existing DAB station stored under
a preset number, including the 1, 2 or 3 one touch buttons,
it will be overwritten when you store the new station to that
number.
Tune to a DAB preset station
In DAB mode:
1. Short press the Preset button (under the top cover).
Preset Recall <4:> is displayed together with the name
or frequency of the station stored there, or (Empty) if no
previous station has been stored.
2. Use the rotary Tune/Select control to move to the Preset
location and station that you would like to listen to (1-10).
3. Short press the rotary Tune/Select control. The radio will
instantly tune to that station and begin to play.
Note: If no DAB station has been stored under the preset
button, ‘Preset Empty’ will be displayed, then the radio will
revert to the previously selected radio station.
DAB display information
When listening to a DAB station you can change the
information that will appear on the display. There are several
different types of information that are sent by the broadcaster.
• Dynamic Label Segment (DLS) - this is scrolling text
information supplied by the broadcaster. Information could
be the name of an artist or music title, DJ’s name, contact
details for the radio station etc.