Bush ESI01U, Instruction Manual

Page: 20 / 60

Getting to know your Stereo DAB/FM Radio
20
If you require any technical guidance or find that your product is not operating as
intended, a simple solution can often be found in the Troubleshooting section
Getting to know your Stereo DAB/FM Radio
You’ll be up and running in no time
Connection
1.
Connect the mains power lead into the
socket on the back of the Radio.
2.
Plug the power adaptor into the mains power
wall socket and switch on.
3.
Slide the On/Off switch on the back of the
radio to On. The Radio will switch on,
Welcome to Digital Radio will be displayed
and then your Radio will go to Standby
mode.
4. The Red LED, on the On/Off button, will
light up to confirm that you are in Standby
mode.
Inserting batteries (optional)
1. Before installing the batteries (not included) please ensure
that the Radio is switched off using the On/Off button on
the top of the radio and the On/Off slide switch on the back
of the radio.
2. Please unplug your radio from the mains power supply.
3. On the back of the Radio, on the bottom
right hand side, press in the tab on the
battery compartment cover to remove it.