Bush ESI01U, Instruction Manual

Page: 30 / 60

If you require any technical guidance or find that your product is not operating as
intended, a simple solution can often be found in the Troubleshooting section
Using your Stereo DAB/FM Radio
30
Using your Stereo DAB/FM Radio
Let’s get started
Telescopic aerial
Please make sure that the aerial is fully extended before
you attempt to tune to a DAB station (a vertical position is
recommended). This will ensure that the maximum signal
strength is available when the radio begins to scan. Extending
the aerial also ensures the best possible sound quality.
DAB Radio mode
• Check that your Radio is in DAB mode. If you are not already
in DAB mode, short press the Mode button (under the top
cover), until you are in DAB mode (check the display).
• The first time you use the Radio or if the station list is empty,
your radio will automatically begin to scan for DAB radio
stations. A progress bar will show the progress of the scan
and the number of stations found during the scan will also
be displayed.
• If you were listening to a DAB station when you switched
the radio off, then this station will automatically be selected
when you switch the radio back on.
Changing DAB stations
1. Use the rotary Tune/Select control to scroll through the
available stations.
2. When the station that you would like to listen to is
displayed, short press the rotary Tune/Select control to
select. There will be a short delay whilst your radio tunes to
your selected station.