Bush CTV401, Instruction Manual, Page: 36 / 56

Standard features
Simple everyday use
Standard features 36
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Time zone
When you select a time zone city, the TV time is set by
the time offset information based on times zones and
GMT, which is received with the broadcast signal.
• Use the buttons to select the required time
zone city and then press the OK button to confirm
(DTV only).
Network settings
1.
Press the MENU button and then use the
buttons to select the NETWORK menu.
2. Press the OK button and use the buttons to
select from the following options. Press the OK
button to adjust.
IP configuration
NOTE: Connect the TV with an ethernet cable to
your network to gain access to the internet.
1.
Use the buttons to select AUTO to
automatically setup the internet connection.
2. To set manually choose MANUAL. Then use the
buttons and numeric buttons to enter the IP
address, Net mask, Gateway & DNS settings.
Network info
Select this option to display information about the
network connection.
Network test
Run this function to test the network.