Bush CTV401, Instruction Manual, Page: 14 / 56

Getting to know your TV
You’ll be up and running in no time
Getting to know your TV
14
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Getting to know your TV
You’ll be up and running in no time
Item Description
1. Power LED Illuminates green when the TV is turned on. Illuminates red when the TV is in
standby mode.
The LED will alternate between red and green when the PVR timer
programming has started in the standby mode.
2. IR (infrared receiver) Receives IR signals from the remote control.
Do not place anything in front of the sensor, as its function may be affected.
3. Standby
Switches the TV on or off from standby mode.
4. Vol + / - Adjust the volume level. Press to select and adjust a setting in the OSD menu.
5. CH -
Press to select a channel or select a sub-menu from the OSD menu.
6. CH + Press to select a channel or select a sub-menu from the OSD menu.
7. Menu
Displays the OSD (On Screen Display) menu.
8. Source Press to select the various input signal sources.
DTV, ATV, COMPOSITE-AV, SCART, VGA-PC, YPBPR (COMPONENT), HDMI1,
HDMI2 and HDMI3.
Confirm a selection on the OSD menu.
1 2
3
4
5
6
7
8