Bush CTV401, Instruction Manual, Page: 30 / 56

Standard features
Simple everyday use
Standard features 30
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Aspect ratio’s explained
Input signal 4:3 Input signal 16:9
4:3 This selection will allow
you to view a picture with
an original 4:3 aspect ratio.
Black bars will appear on
both the left and right of
the screen. This selection will allow
you to adjust the picture
horizontally in linear
proportion. Black bars will
appear on both the left
and right of the screen.
16:9 This selection will allow
you to adjust the picture
horizontally in linear
proportion to fill the entire
screen. This selection will allow
you to view the picture
with an original 16:9 aspect
ratio.
Zoom 1 This selection will allow
you to zoom into the
picture without any
alteration, while filling the
entire screen. However
the top and bottom of the
picture will be cropped. This selection will allow
you to zoom into the
picture without any
alteration. While the 4
sides of the picture will be
cropped.
Zoom 2
This selection is similar to
16:9 mode, but the picture
slightly stretches vertically
and crops a little from the
top and bottom. This selection is similar to
16:9 mode, but the picture
slightly stretches vertically
and crops a little from the
top and bottom.
Just scan (HDMI
mode only)
This selection will detect
the resolution of the
HDMI signal and display
the image with the same
number of pixels. This selection will detect
the resolution of the
HDMI signal and display
the image with the same
number of pixels.