Bush CTV401, Instruction Manual, Page: 16 / 56

Getting to know your TV
You’ll be up and running in no time
Getting to know your TV
16
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Installing batteries in the remote
1.
Press and lift the back cover to open the battery
compartment of the remote control.
2.
Insert 2 x 1.5 AAA size batteries. Make sure to
match the (+) and (-) ends of the batteries with
the (+) and (-) ends indicated in the battery
compartment.
3. Close the battery compartment cover.
Handling the batteries
• Improper or incorrect use of batteries may cause
corrosion or battery leakage, which could cause fire,
personal injury or damage to property.
• Only use the battery type indicated in this manual.
• When the batteries are exhausted, the remote will
not function. Replace both batteries at the same
time with new ones.
• Do not install new batteries with used ones and do
not mix different types of batteries.
• Do not dispose of used batteries as domestic
waste. Dispose of them in accordance with local
regulations.
Handling the remote control
• Take care of your fingernails when pressing and
holding the battery release tab.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote
control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct
sunlight or near sources of excessive heat.
• Remove the batteries from the remote control
when not in use for a long period of time, as it
could cause corrosion or battery leakage and may
result in physical injury and/ or damage of property
including fire.
Remote control operation range
Point the remote control at the TV no more than 5
meters from the remote control sensor on the TV and
within 60
o in front of the TV. The operating distance
may vary depending on the brightness of the room.