Page 5
Installation
Preparation for use
Connecting the loud speakers
1:
Unwrap the speaker wires .
2:
Place a speaker on either side of the main unit,
preferably at the same height, and with at least
150
mm between each speaker and the main unit .
3:
Connect the speaker wire plugs to the sockets on the
rear of the unit
(20)
. Take care to match the speaker
placed to the
LEFT
to the
‘L’
output on the rear of the
unit and the
RIGHT
speaker to the
‘R’
output .
4:
When connecting ensure the locking tab is facing
upwards
(the plugs will only connect this way)
.
Optimal Stereo Position
/MENU
RIGHT SPEAKER
LEFT SPEAKER
Remote control battery installation
1:
Press your thumb down onto the engraved arrow
on the battery compartment cover, and slide in the
direction of the arrow .
2:
Insert one
AAA/
LR3
battery taking care that the
battery direction matches the printed directions
inside the battery compartment .
3:
Slide the battery compartment back onto the remote .
Notes on battery usage
•
Do not insert battery into the remote control in the
wrong direction .
•
Do not charge
,
heat
,
open or short-circuit the
battery . Do not throw battery into a fire .
•
If the remote control does not function correctly or
if the operating range becomes reduced
,
replace
the battery with a new one .
•
Improper replacement of batteries may result
in explosive hazard . It must be replaced only by
batteries with the same or equivalent type .
