producTion of inflaTable boaT
24/
32
owner’s manual
mainTenance
25/
32
In general, work as follows:
Cut out a patch large enough to overlap the damaged area by 30 mm
•
from all sides.
Centre the overlapping patch over the damaged area and trace with a
•
pencil the outline of the patch.
Clean the surroundings of the puncture and the patch with solvent.
•
Apply two thin layers of adhesive using a short bristle brush, in a circular
•
pattern on both the backside of the patch and the patch area on the
boat. Allow the first layer to dry completely (approximately 15 minutes)
before applying the second layer. The second layer should dry until
tacky, then apply the patch to the prepared area and press down firmly.
Using a smooth object (the back of a tablespoon works well), force out
any air bubbles that may have been trapped under the patch, working
from the centre of the patch to the outside.
Wait 24 hours before you inflate the boat again.
•
5.2.2 Large repairs
Larger areas or, if the parts overlaps a seam, should be patched by a pro
-
fessional repair technician at an inflatable repair station. Contact your local
BUSH dealer for the nearest inflatable repair station.
5.2 (winTer) sToraGe
IMPORTANT:
To prevent hull or tube discoloration from marine growth
or polluted waters, do not store boat in the water for extended periods of
time.
1. After use, the boat and all components should be washed with a mild
soap and rinsed with fresh water. Dry all parts before storage in the car-
rying bag. This will help prevent mould or mildew.
2. Wood components should be inspected for damage or deterioration of
the finish. Surface scratches or abrasions should be refinished with a
marine grade varnish.
3. To keep the boat looking new, store the boat in a cool dry area and avoid
excess exposure to direct sun light.
6. environmenT
6.1 discharGe of polluTanTs
and disposal of wasTe
Prevent pollutants REACHING the water around your boat. Using the water
for water sports also means taking care of a clean water sports environ-
ment. Waste means all forms of garbage, plastics, recyclables, food, wood,
detergents, sewerage and even fish parts in certain water – in short, nearly
everything. We recommend you bring back everything you take out with you
for proper disposal ashore. Many areas prohibit the discharge of sewerage
overboard or even an operable overboard waste discharge.
6.2 advisable speeds
When running, take care at high speed this maybe dangerous:
yourself or anyone or anything in the water in front of you.
•
cause considerable waves behind the boat which damages the water-
•
front.
cause unnecessary noise to fellow water sporters.
•
6.3 excessive noise
Noise means engine noise or even yelling. Many bodies of water have ad
-
opted noise limits. Don’t use thru-transom exhaust unless you’re well off-
shore. Music and loud conversation can carry a considerable distance on
water, especially at night.
6.4 exhausT emissions
Increased exhaust (hydrocarbon) emissions pollute our water and air. Keep
your engine tuned and boat hull clean for peak performance. Consult your
dealer and engine manual for information.
